Quality Assurance

The model 538N can measure the beam profile and slice thickness of ultrasound imaging systems by evaluating the appearance of a thin plane of echogenic material against an anechoic background. Scanning the scattering plane from one surface,...

The Models 523 and 523A rubber based tissue mimicking Doppler flow phantoms contain four flow channels of various diameters (normally 2, 4, 6, and 8mm diameter) simulating the deep vasculature of the cardiac and abdominal vessels. Two fixed-angled scan...

Model 504 is designed to evaluate the performance of diagnostic ultrasound imaging systems. These phantoms contain 81 anechoic, cylindrical target structures of varying sizes. The targets are positioned in-line vertically, to permit an entire target...

Model 540 is a rubber based tissue-mimicking rectal scan phantom. It is suited primarily for performance testing of rotary-type transducers, resulting in a displayed image of a full 360 ̊ and may also be used to evaluate the performance of bi-planar...

Model 551 provides a comprehensive means of evaluating the performance of higher frequency (approximately 7.5- 20 MHz) ultrasound systems designed to detect small anatomic features. Our Small Parts Phantom is designed with a combination of monofilament...

The Model 535 rubber-based, tissue-mimicking (TM) phantom is designed to fulfill the basic testing requirements of a Quality Assurance Program. The phantom is designed with a combination of monofilament line targets and six tissue mimicking...

The Model 560H rubber-based, tissue-mimicking (TM) phantom provides a basic means of evaluating an imaging system’s performance along with its 3D volumetric measurements. The phantom combines monofilament line targets, six non-echogenic...

The Model 549 General & Small Parts phantom combines a 30cm depth of field needed to test lower-frequency imaging probes (2-7.5 MHz) with small features in the first 6 cm to test small parts probes (7.5-20 MHz).The scanning wells when filled with...

The Model 527 rubber-based tissue mimicking phantom is designed to test the ability of color Doppler flow imaging systems to discriminate the direction of flow in small, closely spaced vessels at varying depths. Our phantom contains four pairs of 2 mm...

The Models 524 and 525 tissue mimicking Doppler flow phantoms contain four flow channels simulating superficial vasculature. The simulated vessels are located 15 mm below the scan surface. Built-in scanning wells are provided to permit the use of water...

The Models 532A and 532B Contrast Resolution phantoms are composed of a rubber-base tissue-mimicking material. These models are provided with a built-in scanning well to permit the use of water or a low viscosity gel as a coupling medium. The Contrast...

The Model 700-D, Doppler Flow Digital Controller and Pumping System, combined with an ATS Doppler Flow phantom provide an easy and accurate means of evaluating an ultrasound Doppler imaging system’s ability to detect sensitivity at varying...